(ENG) [4DDM] Camera Property

Owned by Joowon Hong (홍주원) (Unlicensed)
Last updated: 10/03/2023 by Timothy Kim (김동민) (Unlicensed)
2 min read

This is a tab where you can check and modify the setting values of the cameras set in the previous Live View. The tab is divided into Property View, where you can view the properties of all cameras at once, and Property Setting, where you can change the detailed settings of all cameras.

Camera Property View

You can view the properties of all cameras mapped to 4DDM at once. There are default values for the cameras, or values you set in Live View.

  • Property / Lens / Gimbal Control

    • Property Save / Load: Saves the current camera's property value as a JSON file / loads the saved camera property value.

    • Lens Auto Focus: Automatically focuses the checked (selected) cameras.

    • Gimbal Control: [Wakeup] / [Sleep] / [Get Position] You can wake up, sleep, and get the position of the selected Gimbal.

    • Gimbal Preset: Select a Gimbal Preset and click [Move] to move it to the preset location.

    • Select Properties: You can select and view only the properties you want to check.

    • Refresh: Refresh the most recently set value 

Camera Property Setting

This is where you can set the properties of all cameras mapped to 4DDM, individually or collectively.

 

  • Edit Selected Camera Property

    • Undo Last Apply: Reverts property changes to the previous setting.

    • Apply Selected: Button to apply the selected camera in the Property View with the changed property settings.

    • Video Output Settings

      • ※Rotate setting added since 4DMaker 4.2.1: Cameras with Rotate On can receive and create flipped video without additional calibration data.

      • Exposure, Color, Gimbal, Lens settings

    • Other settings

 

Step of Camera Property Setting

Step 1. Camera Property Tab

Step 2. Select the camera or cameras to change the value in the right Property View (Check)

Step 3. Change the value by selecting the setting you want to change in the left Property Setting

Step 4. If the values of the selected cameras do not match, [Mixed] is displayed, and if you want to unify them, click x to enter the desired value.

Step 5. Check the property you want to change and click the [Apply Selected] button.