(ENG) [4DDM] System List

Owned by Joowon Hong (홍주원) (Unlicensed)
Last updated: 10/27/2023 by Dukyoung Jang (장덕영) (Unlicensed)
3 min read

 

This is the first tab that appears when you run the 4DDM program. System List allows you to check and control the connection status of all systems when all systems are registered (mapping) to 4DDM.

Status

Status shows the status of the systems connected to the 4DDM

 

  • Status 1: Displays the status, temperature, description (Ok or NG ..), PoE status, IP address, etc. of the camera equipment connected to the DM/PD PC.

  • Status 2: Displays the Devon version, connection status, PreSd setting, etc. of the Vision Processor PC connected to the DM/PD PC.

  • Status 3: Displays the daemon version, connection status, IP address, remaining capacity, etc. of the PreSd PC and PostSd PC connected to the DM/PD PC.

  • Status 4: Displays the daemon version, connection status, IP address, etc. of PCs with daemons connected to the DM/PD PC.

  • Status 5: Displays the connection status, IP address, brand name, etc. of PoE devices connected to the DM/PD PC.

※Green LED - OK, orange or yellow LED - not OK or disconnected

Jobs

Jobs are icons that work to control the power and processes of systems connected to the 4DDM.

  • Job 1: Icon for reconnecting all systems connected to DM program such as camera equipment, VPd PC, PreSd PC, PC with Daemon installed, PoE equipment, etc. and checking messages, buffers, logs, and Vision Processor at once.

  • Job 2: Icon for individual power ON/OFF, reconnection of camera equipment, and group power ON/OFF of PoE equipment connected to the camera.

  • Job 3: Icon for reconnecting PCs with VPd PC, PreSd PC, and PostSd PC Daemon installed.

  • Job 4: Icon to power off (Off all) or reboot the cameras connected to the PoE devices.

Clicking the icon and performing the action will take some time, so be patient

Access to the PreSd Data and Delete

If your PreSd PC's D and E drives are fuller than they need to be, you can access the PreSd PC directly to delete unnecessary data.

Step 1

[Steps to delete PreSd PC data]

  1. Check PreSd drive capacity via 4DDM Storage/Daemon window

  2. Check the IP address of the PreSd PC that is full and needs to be deleted.

  3. Right-click the index to connect to the 4DReplay folder of the PC.

  4. Right-click the IP address to connect to the PC's Remote Desktop Connection

  5. Right-click Used to go to the Drive folder of that PC

Step 2

[Steps to erase data on PreSd PC]

  1. Enter [D_Movie] or [E_Movie].

  2. Proceed to delete all unnecessary data