Operation

OP Booth

How to On/Off Systems

• ON

1. Run AC (Agent Control)

2. Grey - offline, Orange - Server turned on, Daemon not connected

3. Click Turn on All PC

4. Wait for Servers are Online (when turns orange, Click Refresh)

5. Run DM (Device Manager)

6. Click PoE Reboot

7. Wait for camera on (2~3min)

8. Check camera status (when status are not good, process camera reconnect, PoE Reboot)

9. Run PD (Producer)

• OFF

1. In DM, click PoE Off to turn off camera (Click PoE and wait for message success)

2. In AC, click Turn Off All PC

Prepare Processing

• IF YOU USING PORTABLE CALIBRATION MONITOR YOU SHOULD CHANGE CAMERA PROPERTY TO UHD-30

• Adjust Camera

  steppe_how to adjust(1 focal point).mp4

Need to Check

• Using portable monitor to adjust camera, camera property should be UHD30, 60p cause noise to calibration monitor

• Check PreSd(10.82.5.3/4/5/6) storage(D://, E://) before shooting

• Check MMs(10.82.5.211) storage(D://) before shooting

• Calibration should be done before 1h before match starts

• When match stops like half time, DON’T disconnect camera, using Save to PreStorage On/Off