Skip to end of banner
Go to start of banner

How to set FD10

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

Access below folder in Main PC

C:\Users\FDReplay12\Downloads\Utilities\-FD10, Gimbal\FDController

1.Open CommandList.CSV with NOTEPAD

2.Edit current camera’s IP address

3.Edit current PC’s IP address

4.Edit IP address, subnet mask, gateway wants to change

  1. Run FDController

  2. Click Refresh

  3. Check imported data

  4. Click Start

  5. When indicator turns green, it’s done

  • No labels