4DLivePD refers to a separate program that directly transmits groups and channels set by the operator to the user's screen among the 4DLive streaming services. Users can view the videos of groups and channels set by the operator in the 4DLivePD program via mobile or the web without having to control the video directly.
4DLivePD Start View
When performing the 4DLivePD program, the first screen that pops up is the screen that appears. In this window, the operator can directly configure the PCs to perform each daemon independently through the IP address in the same way as 4DPD. However, it should be remembered that 4DLivePD is the same process program as 4DPD, so it cannot be run at the same time as 4DPD.
[Program Execution Steps]
Check if all daemons required for DM/PD are running and if 4DPD processes are not running
Click the 4DLivePD icon on the desktop to launch LivePD
Select LivePD Venue (Default: Multiview)
Enter the Main Control PC IP address in Master PC IP (Set Control Daemon IP information is taken from the IP address registered in 4DDM)
Click Connect
※ When connecting normally with an AWS instance, a CMS OK pop-up window occurs.
4DLivePD UI
The 4DLivePD program is in a disconnect state when the 4DLive Streaming service is not running, and the program can be operated only when the 4DLive Streaming service is in a normal state. The following describes the basic operation of the 4DLivePD UI.
4DLivePD Status
Not Following / Following : When zooming in and out through the mouse wheel is not applied to transmission in PDView, Not Following is displayed with a blue dotted line, When zooming in and out after clicking the left mouse is applied, Following is displayed with a solid red line
Preview: Before converting channels, you can preview the screen of the channel you want to change, click the 'P' button next to the favorite camera icon below to preview the channel in Preview on the Preview screen.
Program( ) : The screen showing the transmitted channel, select the channel directly from Camera No, or click the 'P' button next to the favorite camera icon below to select the transmitted channel and display it as a red box.
Favorites Camera View: A window that displays the Button Layout set in Favorites Camera Settings, click the Camera number to change the channel sequentially in the nearest direction (Quick switch when you press the Ctrl key and click the Camera number)
4DLivePD Jobs
Favorites Camera Setting : Detailed camera setting function for each group
CH Speed: Select the preset camera switching speed set in Favorites Camera Settings, Default-Fast (0.7sec), Normal (1sec), Slow (1.5sec)
Camera No : Expand the list of channels in the group to Dropbox, and switch to the corresponding channel when selecting the camera number
Control Mode (Connect, cannot be changed) : Tracking – When selecting a group with the mouse, Drag / Click – When selecting a group with the mouse, click
Data Transmission interval : Set the streaming data interval to be transmitted (Applied)
Zoom in: Displays the Zoom value set by the mouse wheel in PDView
Connect: The screen specified by PDView is split
Step of Favorites Camera Setting
When setting the PDView of the 4DLivePD program, it is necessary to pre-set the operator as the camera setting for each group. Follow the steps below to set up the Favorites Camera.
[Camera Registration Step]
Specify the channels to which PD Mode will be transmitted through the group
Check the desired Camera No (up to 10)
[ > ] Apply to Favorites Cameras List with a click of a button (automatically applied to Favorite Cameras' Button Layout)
[Camera Position Setting Steps]
Specify the appropriate camera number in the appropriate space from the operator's criteria
Set the location with the camera number Drag & Drop according to the actual installed camera order
※ Click the camera number and move to the desired location
[Camera Switch Speed Setting Step]
When moving channels sequentially from the current camera to the camera to be changed, set the travel time for each channel.
Fast (shortcut F1): 0.7 seconds,
Normal (shortcut F2) : 1 second,
Slow (shortcut F3): 1.5 seconds, can be changed as needed
If you need to apply the change value, click Save
Close the window [ x ] and then click the Yes button
(No : Close the window after not applying the change value, Cancel : Keep the window after not applying the change value)
0 Comments