Skip to end of banner
Go to start of banner

(ENG) [4DReplay] Preference

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

Preference

Preference is a configuration level that exists in both 4DDM and 4DPD, meaning that settings made in one or the other will be applied to both program environments simultaneously. It is mainly used to set external settings and internal details required to use 4DReplay or 4DLive.

General Setting

This step sets up the basic 4DDM/4DPD Software environment.

Language

  • Select Language : Choose your preferred language for the program

 

File Template Path

  • Template Path : Click the folder icon to designate the save path for templates

  • Effect Template Path : When using AR Effects, click the folder icon and select the Effect Template you want to use

  • Camera Set Path : Select the folder icon and set the location of the Camera Preset information json file for Local iVOD or Multi Channel.

 

Camera Frame

  • Select Camera frame (Local Record) : Screen shown in Frame Viewer on the Record tab of the PD screen Frame settings

  • However, the Camera Property needs to be set the same as the shooting frame in 4DDM.

Record

This is where you set up the settings for recording, editing, and broadcasting your video.

Using SDI Player

  • SDI Server IP: Enter the server IP that is responsible for sending and making video clips, and enter the MMS PC IP address.

  • SDI Client IP: Enter the Client IP that is responsible for creating and making video clips, and enter the MMC PC IP address.

Movie Make Settings

  • UHD to FHD: If checked, save UHD video as FHD video

  • Debug Mode: If checked, the camera number and frame number will be displayed in the making video.

  • Codec: Select the codec type to convert (H.264 or H.265)

  • FrameRate: Set the frame rate of the output video produced by MMd.

  • TimeOut: Automatically stop video production when the video production time exceeds the set value.

  • Bitrate: Set the bitrate of the output video produced by MMd.

  • Alternative Save Location: When checked, a copy of the video and replay file created with Multi Channel is created.

  • Alternative Save Location

    • You can specify the path to save the replay file in addition to the default path ([MMS]\[SPD_Movie]\[replay]).

    • Must be set to create "Multi-Channel" among VOD Types

    • All created "Replay" and "Multi-Channel" videos are also saved in that path.

    • Local i.VOD is saved in the default path even if you do not specify a path.

    • The folder name of Alternative Save Location cannot contain any spaces, and all permissions must be set.

 

Use Core Module Daemon

  • Core Module Daemon IP : Check to use the CMd, and enter the IP of the PC where the CMd is installed.

  • Stabilization Venue : Choose where you're shooting

Video Conversion Settings

  • Replay for IMS

  • Check Use Transcoding when using

  • The video will be created for Mobile to upload to IMS, and when creating, set Bitrate / GOP / Codec.

  • For Codec, there are h.264/h.265.

  • The file is created with "_mobile" appended to the name of the file (Ex. NAME_mobile.mp4)

Local i.VOD

Multi-Channel Video

 

Camera Record Setup

  • Camera Record Wait Time: Automatically stop production when Camera Record time exceeds the set value.

  • Camera Sync Wait Time: Wait for Camera Sync time with the set value

  • Camera Sync Limit: Limit the camera sync time to the set value

Streaming

This is where you set up the overall configuration for the 4DLive service.

Use IMS(Integrated Management Server)

  • Use IMS: If checked, enables the Live Streaming feature.

  • IMS Address: Enter your AWS registered IMS server IP address

  • System ID: Enter the System ID assigned to your IMS and click "Refresh".

  • Use ExtraView Mode: Select if you want to use ExtraView mode. See more details

    • Main: Select to use as the Main PC.

    • ExtraView: Select to use as an ExtraView PC.

 

VPD Bandwidth Setting

  • Min Bandwidth : Set to automatically disconnect when bandwidth is lower than the set value

 

PostSd PC Buffer Setting

  • PostSd Buffer Time : Set PostSd device buffer time from 0 to 30 seconds

 

Force Save to PostSd

  • Force Save to PostSd : If checked, set a limit on the number of files to force save to the device; if set to 0, save to PostSd file indefinitely

Use Live Stabilization

  • Use Live Stabilization : If checked, enable Live Stabilization feature

Audio

  • Show audio information when an audio channel is present

Streaming Server Channel

  • Display Streaming Server Channel information when running Live

  • Click {I (Information)} button to check the streaming information of the group.

  • Activate All: Activate all Streaming Cameras

  • Deactivate All: Deactivate all Streaming Cameras

  • If a camera is registered but not connected, or if there are cameras you don't want to include in streaming, click the Activation toggle button to deactivate it.

Interactive VOD

This is the step to configure Interactive VOD.

Full-time option

  • Create Full-time Interactive VOD: If checked, forward interactive VOD creation triggers to the server at the start and end of recording.

Event System

This step is for configuring the 4DPromo service.

Register and set up a Fan Event booth server

  • Use Fan Info Server : If checked, register Fan Info Server

  • Fan Info Server IP : Enter the Fan Info Server IP

  • Port: Enter the port used by the Fan Info Server

  • Event ID: Enter the event ID

  • Bitrate: Set the bitrate per second of the video to be emailed.

  • GOP: Set the GOP (number of sets of frames used in MPEG compression) to be sent in the email.

  • Codec: Set the video compression and decompression codec to be sent in the email.

    • ※  Fan Event booth is a service that instantly delivers Replay footage to users via email by event name.

This is the step to configure the settings related to creating logos for 4DReplay or 4DLive videos.

Setting up logo information

  • No labels