Step of ReCalibration
You can reset the calibration while shooting video if you need to modify the initial calibration settings or if the camera's position changes slightly while shooting and needs to be recalibrated. Use the following steps to reset the calibration.
Step 1. [Run ReCalibration]
Selecting a ReCalibration Point
Run PD > Connect and select Record > Recognize Camera Position Change > ReCalibration
Create a marker on the timeline (shortcut key: Z)
Select a time marker to apply ReCalibration to
Step 2. [Verify the Recalibration task]
ReCalibration Load to 4DDM & Check
OK: Forward image to PD → DM (Cancel: Cancel ReCalibration)
Yes: Recall Recording Image Calibration (No: Do not recall Recording Image)
Step 3. [ReCalibration Compare & Modify(In 4DDM)
ReCalibration Compare
Video from ReCalibration Loaded into 4DDM
Check the match between 4DPD Record screen and 4DDM Calibration screen
Calibration Data Modify
Calibration Progresses Based on Updated Image from DM to Calibration
Set 2D/3D/2D+ Position Tracking
Reset Point
Calibration adjustment completed > Click Save Calibration Data
Step 4.
Calibration Modify Check
Displaying ReCalibration Points in the 4DPD Timeline after a Calibration Save in 4DM
Proceed with creating data with ReCalibration applied from this point forward
If you do not save the calibration in 4DDM, it will remain unapplied as it's only requested but not modified
Add Comment