Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Edit(Mapping) 

Info

Edit (Mapping) is a work step to map out which systems 4DDM Software will connect to and how before using 4DDM. This process starts automatically after the 4DDM Start View if there is no data in the new EMd DB, or if there is existing mapping data in the EMd DB, you can modify the mapping status by clicking the Edit icon.

Table of Contents

Step of Edit (Mapping)

Step1. [Steps to register PoE]

...

  1. Enter the PoE Switch IP address in the blank space on the left (if registering one by one)

  2. Click the [+] icon to fill in the blanks and automatically register the next IP address.

  3. Enter the first and last IP address of the PoE Switch in the right blank (if registering more than one at a time) (ex.10.82.17.234~10.82.17.239)

Step2. [Steps to register a camera]

...

  1. Enter the CAM IP address in the blank on the left (if registering one by one) and set the CAM type using the drop-down function on the right.

  2. If necessary, enable Gimbal and enter the Gimbal IP address.

  3. To fill in the blank and register additional IP addresses, click the [+] icon to manually enter the next IP address.

  4. (If registering more than one CAM at a time), enter the first and last IP address of the CAM in the right blank (ex. 10.82.11.11~10.82.11.30).

Step3. [Steps to PreSd, PostSd, VPd]

...

  1. Enter the PreSd PC IP address in the Pre-Storage blank and click the [+] icon to add the PreSd PC IP address

  2. (When using Live) Post-Storage Enter the PostSd PC IP address in the blank and click the [+] icon to add the PostSd PC IP address

  3. (When using Live) Enter the VPd PC IP address in the center blank and click the [+] icon to add the VPd PC IP address.

  4. Enter the first and last IP address of the VPd PC in the right blank (if registering more than one) (ex. 10.82.12.11~10.82.12.30).

Step4. [Steps to Camera - PoE Mapping]

...

  • Camera - PoE Mapping steps

...

※ Depending on the H/W case, the [E_Movie] folder on the PostSd PC may not exist.

Step5. [Pre Storage Mapping steps]

...

  • [PreSd – VPd Mapping steps]

...

※ (Common) When selecting a selected camera or camera range, hold down Ctrl + Shift and click.

Step6. [Special Camera Mapping steps]] (Optional)

...

  • [Special Camera – VPd Mapping steps]

...