Skip to end of banner
Go to start of banner

FD10

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Current »

It is a camera developed in-house with Xacti (Sanyo's camera brand) in Japan, and the model name is FD10.

FD10 is an IP camera, and each camera has a unique IP

The main advantage of the FD10 is that the sync between cameras is maintained for a long time when shooting. Therefore, it is possible to shoot for a long time without stopping recording. In addition, it is easy to connect the camera and 4DMaker if there are no physical problems in the connection.

Various problems caused by the 4DA's presence on the site can also be prevented.

However, since the camera does not have a viewfinder or LCD, it must be calibrated by external monitor.

In this process, if the connection signal is weak, the camera calibration is difficult and the overall camera configuration is more complicated than the GH5 configuration, which may take longer to install. In addition, the time required for the camera to reboot is also relatively long compared to the GH5. (It takes about 1 to 5 minutes)

 

  • No labels