(ENG) Producing Basic 4DReplay Video

The following procedure describes how to make a basic video of 4DReplay. All cameras and system equipment must be checked and prepared for calibration. For more information on the function of [PD], please refer to the 4DPD Tab function description.

Step 1. [Create Template in PD Template Editor Tab]

※ For how to make a template, please refer to the Step of Making Template explanation

Step 2. [Click "Connect" in the PD Record Tab to start "Recording"]

Step 3. [Select the camera index that shows the situation in Frame Viewer]

※ You can move the camera index with the arrow key [↑↓] button, and you can go directly to the desired camera with the shortcut [*] of the numeric pad.

Step 4. [Left-click Marker View at the time when you want to create a video in Marker View]

Step 5. [Use the shortcut [z] key to activate the point of view and confirm the creation of a marker list]

Step 6. [Click on the activated point or use the Marker List to apply the time point and then check the marker list]

Press the [x] key to automatically select the most recent activated green marker
Press the [Ctrl + Z] key to create the most recent marker and proceed to blue activation.
To delete Marker, select a Marker from the activated Marker (green) or Marker List, and then type [Ctrl + D]

Step 7. [Select "Replay" from the Select the VOD Type menu]

Step 8. [With the marker enabled (blue), select the template, click the "Make Video" button to start video production]

Step 9. [Check the generated video]

You can check the replay video created in the VOD tab immediately.

You can check the Replay file created in the {MMS ip}>{SPD_Movie}>{replay} folder.