How to set FD10 IP with FDController(ENG)

Owned by Dukyoung Jang (장덕영) (Unlicensed)
Last updated: 12/13/2023
1 min read

Access below folder in Main PC

C:\Users\FDReplay12\Downloads\Utilities\-FD10, Gimbal\FDController

1.Open CommandList.CSV with NOTEPAD

2.Edit current camera’s IP address

3.Edit current PC’s IP address

4.Edit IP address, subnet mask, gateway wants to change

  1. Run FDController

  2. Click Refresh

  3. Check imported data

  4. Click Start

  5. When indicator turns green, it’s done