FD10
- Kideuk Kwon(권기득) (Unlicensed)
- Hongsu Jung
- Dukyoung Jang (장덕영) (Unlicensed)
It is a camera developed in-house with Xacti (Sanyo's camera brand) in Japan, and the model name is FD10.
FD10 is an IP camera, and each camera has a unique IP
The main advantage of the FD10 is that the sync between cameras is maintained for a long time when shooting. Therefore, it is possible to shoot for a long time without stopping recording. In addition, it is easy to connect the camera and 4DMaker if there are no physical problems in the connection.
Various problems caused by the 4DA's presence on the site can also be prevented.
However, since the camera does not have a viewfinder or LCD, it must be calibrated by external monitor.
In this process, if the connection signal is weak, the camera calibration is difficult and the overall camera configuration is more complicated than the GH5 configuration, which may take longer to install. In addition, the time required for the camera to reboot is also relatively long compared to the GH5. (It takes about 1 to 5 minutes)
