Skip to end of banner
Go to start of banner

(ENG) [4DReferee] Preparing your on-site system

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Current »

Here's what needs to be on-site to run the 4DReferee service.

Installation

Install the cameras and systems on site according to your pre-planned installation plan.
NOTE

 (ENG,KOR) [4DReplay] Installation Manual - Standard
Unable to render {include} The included page could not be found.
 Installation : '23 춘천 코리아오픈태권도대회
Unable to render {include} The included page could not be found.

System check before the start of the match.

  1. Rack settings are the same as the existing 4DReplay and 4DLive system checks.
    NOTE

 (ENG,KOR) System Check - [4DReplay] Installation Manual
Unable to render {include} The included page could not be found.
  1. Streaming Server (4DSS), Tablet settings

4DReferee App Setting

  1. Check tablet behavior after a test recording.

  2. Overview the referee guide after the final 4DReferee app operation check.

  3. Waiting for an operator at the judges' box

  • No labels

0 Comments

You are not logged in. Any changes you make will be marked as anonymous. You may want to Log In if you already have an account.