Skip to end of banner
Go to start of banner

(ENG) Producing Multi-Position Tracking Video (TargetPos)

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Current »

Multi position Tracking is a function that specifies multiple Target Pos used to give Zoom effects and screen movement effects to give various zoom effects and position tracking effects.3D It can be operated only when calibration data exists, and the basic making method follows here(ENG) Producing Basic 4DReplay Video

Step1. [Specify Target of Position when creating template (TargetPos1~ TargetPos9)]

Step 2. [Select "Replay" from the Select the VOD Type menu and select a template using Multi-Position Tracking]

Step 3. [Check the number of Position Counts in the Template Effect information at the top right]

Step 4. [Enter Position Tracking Setting Mode]

  • 4-1 Click the Position Tracking button, or click the shortcut "Q" button to enter the Position Tracking mode.

  • 4-2 Specify the number of Position Counts while holding down {keyboard top numeric key (1~0)} at the desired point (TargetPos1~ TargetPos10)

※The upper part of the Targetpos line represents the center point of the screen, and the lower area is placed on the bottom surface and rotated to the reference point.

Step 5. [Video Making]

Once you have completed the template, Marker, and TargetPos settings, click Make Video to proceed with video making.

  • No labels

0 Comments

You are not logged in. Any changes you make will be marked as anonymous. You may want to Log In if you already have an account.