(ENG) Basic operating 4DREPLAY Services

Owned by Joowon Hong (홍주원) (Unlicensed)
Last updated: 10/06/2023
1 min read

Describes how to use the direct 4DReplay & 4DLive program with Before You Begin finished. Make sure to proceed correctly in the following order.

Workflow of 4DReplay Operation 

 

Step 1. Check the status of the network, and if there is a problem with the status of the network, proceed with troubleshooting

Step 2. Check the focus and color of the camera, and if there is a problem, adjust the camera property

Step 3. Make sure that Calibration is working properly, and if there is a problem, reset Calibration

(Steps 1, 2, and 3 are steps Before You Begin)

Step 4. Create a Template in [PD]. If you already have a template created, move on to the next step.

Step 5. Start Recording (Connect button)

Step 6. Find the time to make the 4DReplay video, select the appropriate template, and click Make

Step 7. The 4DReplay video is transmitted to the station via SDI cable