...
When the venue construction is completed, the first thing to do is check the network connection status of the devices before operating the 4DReplay & 4DLive service. In 4DDM, the connection status of devices such as camera, PC, and Switch is all green to check whether , indicating that the connection is normal.
...
If there is a device whose status is not green, proceed with the ping test to the IP of the device
(see the Main Ping Test section https://4dreplay.atlassian.net/wiki/spaces/4DManual/pages/1705381708/ENG+4DReplay+System+Check#Main-Ping-Test below for details on the ping test method)If the ping connects normally, but does not turn green, check the Daemon activation (see the https://4dreplay.atlassian.net/wiki/spaces/4DManual/pages/1705381708/ENG+4DReplay+System+Check#Check-Daemon-Activation section below for details on how to check
the Daemon Activation)
Camera Property Adjustment
After checking the connection status of the network device, it is necessary to check whether the camera's focus, color, and exposure are normalset correctly, unifieduniformly, and well set appropriately for each sports environment. When building setting up a pre-venue, if the camera is focused on through the Live View or Direct Monitor connection, check whether the camera properties are unified or need to be modified separately consistent or require individual adjustments in the Software software step. Then, and then proceed to adjust the camera property of the 4DDM Tab as needed.
...
Recognize Identify in advance the part that which aspects should be unified standardized and the part that which should be different due to adjusted based on the characteristics of the camera camera’s position
and modify it , and make the necessary modifications accordingly(for details in the step of adjusting the camera properties, refer to the (ENG) [4DDM] Camera Property section above)When Once the camera property settings for the entire venue to be photographed are completed, click the Property Save button at the top of the Camera Property View to recommend saving the property information (use the Load button to load the property information afterwards)
Calibration
As the final step in Before You Begin, Calibration is an essential pre-stage prerequisite before you start commencing video editing your video. Before starting the operation, it is necessary to check whether verify if calibration data is registered or whether calibration is properly setsettings are correctly figured. Calibration is performed using the calibration function of loacted in the 4DDM Tab.
For more information, see here additional details, please refer to the following link https://4dreplay.atlassian.net/l/cp/FyRKMWgk
...
Click the Record button to simultaneously shoot
capture images of from all cameras facing the reference bar (All data related to calibration : C:\4DReplay\Calibration)Select the Calibration Type of 2D or 3D or 2D + Position Tracking on the photographed image and set the Point to the desired point (refer to the https://4dreplay.atlassian.net/wiki/spaces/4P/pages/1705379349/ENG+4DDM+Calibration#Step-of-Calibration section for the steps to set the Point according to the Calibration Type)
After completing all calibration coursesprocedures, run launch the 4DPD program to perform initiate 4DREPLAY Services