Environment

Multi PD Switching

You can switch to Main PD / Sub PD by clicking the button to set Mode Change in the upper right corner.

...

•   Main PD

  • PD #1 (Main Control PC) or PD #2 (Sub Control PC) is set to Main PD to run the PD program first.

  • When Clicking on "Multi PD is clicked, " switches between two modes: 1) Main Mode and 2) MainRecord Mode are changed.

  • Main Mode: Refers to the mode in which the SDI Tab is activated and is in charge of SDI transmission.

  • MainRecord Mode : SDI Tab is disabled and SDI transmission cannot be controlled.

...

•   Sub PD

  • When the PD program is running on another PC and the PD program is turned on on another PC afterwards, it is automatically selected as Sub PD.

    • (Usually used as PD #1이 Main PD, PD #2가 Sub PD)

  • The role of assisting the Main PD work by following the shooting in progress in the Main PD

  • When disconnected from the main PD, the sub PD also automatically terminates the recording follow.

  • If the Template path of the Preference is set to the same path, the same Template can be used.

  • Recording Follow : Get the current record information of the Main PD at the time of clicking (Marker, Record Time, ReCalibration, Calibration, Gimbal Preset ..)

  • Sync Marker : Import the Main PD current marker at the time of clicking as it is

    • ※ Delete all markers of the Sub PD that were in the process

  • Sub Mode : SDI Tab is activated and refers to the mode in charge of SDI transmission.

  • SubRecord Mode : SDI Tab is disabled and SDI transmission cannot be controlled.

RLog

RLog is a file containing all Record Session information and can be loaded by clicking the folder icon in the upper right corner. You can recreate the original video through the previous recording information of RLog.

...

•   Original Path

  • Set the location of the backed-up original video data instead of the PreSd image from the same system

  • Change to the path where you backed up the image data to be stored on the PreSd PC

    • ※ If you set the Korean path, you cannot change the path, and you must put a backslash (\) at the end.

Preference

If you need to set the reference settings used in 4DDM, you can do it in 4DPD.

It is the same as 4DDM's Preference, so you can check the details in (ENG) [4DReplay] Preference