| Info |
|---|
This section describes the system setup required to run the 4DReferee service. |
| Table of Contents |
|---|
Hardware configuration
The configuration is the same as the Local Live System in 4DReplay and 4DLive, and since we are streaming in 4K, the Camera’s Vpd must be configured in a 1:1 ratio.
Status colour Blue title NOte
| Expand | ||||||
|---|---|---|---|---|---|---|
| ||||||
|
| Expand | ||||||
|---|---|---|---|---|---|---|
| ||||||
|
Add the RTSP Streaming Server (4DSS).
Set the number of Vpd’s by checking the camera setup depending on the project.
Status colour Blue title NOte
...
Additional hardware may include a tablet PC, jog controller, and a 4K monitor.
...
Install Plan
Since 4DReferee App supports 2-Channel mode, you need to set up the installation plan by using two main groups and adding one “scoreboard view” in the group. (For example: the Chuncheon Taekwondo Competition, we set up three groups: high level, low level, and “scoreboard view”)
...
| Expand | ||||||
|---|---|---|---|---|---|---|
| ||||||
|
...
Streaming Server Setup (4DSS)
Set the 4DSS network IP to the system.
Manually set the channel index to be able to receive RTSP streaming by connecting directly to 4DSS.
Wire the 4DSS server directly to the switch that is connected to the PostSd.
...
Tablet settings
Set your tablet's network IP to static to match your system
Wired connection with the tablet directly to the switch that is connected to the PostSd
Install the 4DReferee Application onto the tablet
Enter Server (4DSS) IP when first entering 4DReferee Application
...
Manually entering Live settings, Camera groups, and Video information in 4DMaker
In 4DMaker DMPD, you can directly modify the group information and video output information of the SubChannel List for RTSP streaming.
...